FREE GROUND SHIPPING ON ORDERS OVER $100

Search

Link copied

$895

Dante

STYLE NO.N1209.R4-3007-D-10.5

STYLE NO.N1209.R4-3007-D-10.5

Dante is a Lucchese staple that calls ramblers, gamblers, merchants and all alike to the open range in style. Made from supple hand stained Full Quill ostrich leather, this Western...
Read more below

Size:

Selected:

Size: Width: Toe + Heel:

Choose size

Size

Order a half size up for a wider fit

Lucchese boots generally run true to size, but don’t be surprised if your western boot’s size is slightly smaller than your dress shoe size due to its construction. Consult our Fit Guide for an expansive understanding of your true fit.

Size Chart

Men’s Size Conversions Chart

size-chart
Size:
Fit guide
Size chart
Order a half size up for a wider fit

Width

Men's boots are sized in D and EE widths.
D = average to medium EE = wide

Women's boots are sized in A, B, and C widths.
A = narrow B = average to medium and C = wide

A general rule of thumb is the further you get from the letter A, the wider the boot is.

Width:

Toe & Heel

Lucchese offers a variety of toe shapes and heel styles so every customer can find a boot well-suited for his or her particular lifestyle and personality. See our full list below.

 
TOES
Q TOE Modeled as a hybrid toe, it is highlighted by its squared-off edge and low profile. (1 ¼” wide)
W TOE Our modern square toe is found on walking & riding boots and is known for its comfort. (1 ½” wide)
7 WESTERN SQUARE TOE A modern take on the classic western style, this square toe is one of our most popular. (⅞” wide)
6 MEDIUM ROUND TOE A traditional rounded western toe, it is timeless and elegant.
5 - SNIP TOE Originally made for getting in and out of a stirrup, the snip toe is pointed for a traditional look. (5/8:” wide)
S TOE Found on dress and casual styles; this rounded toe abuts a squared off outsole for a distinguished look.
S5 - 5 TOE WITH A SPRING Our 5 toe with a pronounced upward curvature of the toe box. (⅝” wide)
R - ROPER TOE The roper toe is rounded and has a u-shape that is most like a normal shoe toe shape.
C TOE Similar to the roper toe, the C toe has a slightly less rounded u-shape; often found on work boots.
X1 - FRENCH TOE Found on dress boots; this rounded toe abuts a squared off outsole for a distinguished look. (1” wide)
Z TOE The narrow rounded toe is close to a common dress shoe as it narrows.
2 TOE A more narrow rounded toe that almost comes to a point is found on traditional western styles.
K TOE This is a rounded toe with a defined squared off outsole for contrast.

 
HEELS
0 heel (⅞” tall)
3 Walking heel (1 ½” tall)
4 Cowboy heel (1 ¾” tall)
9 Roper with pitch (1” tall)
8 Fowler heel with a pitch (1 ⅛” tall)

Toe + Heel:
Made to order

Selected toe + heel:

Selected toe + heel:

This item is currently in stock at our retail store. To have it delivered to your home, call the store to place your order.

Fit Guide

  • TOE + HEEL
    TOE + HEEL

    01. TOE BOX

    The toe box on a boot surrounds the toes and the front part of the foot.

    02. HEEL

    A boot will initially slip slightly in the heel (around ¼ to ½ inch)

    WHAT'S YOUR STYLE

    Lucchese offers a variety of toe shapes and heel styles so every customer can find a boot well-suited for his or her particular lifestyle and personality. See our full galleries below.

    TOE GALLERY

    Q TOE

    Modeled as a hybrid toe, it is highlighted by its squared-off edge and low profile. (1 1/4” wide)

    W TOE

    Our modern square toe is found on walking & riding boots and is known for its comfort. (1 1/2” wide)

    7 WESTERN SQUARE TOE

    A modern take on the classic western style, this square toe is one of our most popular. (7/8” wide)

    6 MEDIUM ROUND TOE

    A traditional rounded western toe, it is timeless and elegant.

    5 SNIP TOE

    Originally made for getting in and out of a stirrup, the snip toe is pointed for a traditional look. (5/8” wide)

    S TOE

    Found on dress and casual styles; this rounded toe abuts a squared off outsole for a distinguished look.

    S5 - 5 TOE WITH A SPRING

    Our 5 toe with a pronounced upward curvature of the toe box. (5/8” wide)

    R ROPER TOE

    The roper toe is rounded and has a u-shape that is most like a normal shoe toe shape.

    C TOE

    Similar to the roper toe, the C toe has a slightly less rounded u-shape; often found on work boots.

    X1 - FRENCH TOE

    Found on dress boots; this rounded toe abuts a squared off outsole for a distinguished look. (1” wide)

    2 TOE

    A more narrow rounded toe that almost comes to a point is found on traditional western styles.

    K TOE

    This is a rounded toe with a defined squared off outsole for contrast.

    HEEL GALLERY

    0 HEEL (7/8'' TALL)  

    2F FASHION HEEL (2'' TALL)

     

    3 WALKING HEEL (1 1/2'' TALL)

    4 COWBOY HEEL (1 3/4'' TALL)

    9 ROPER WITH PITCH (1'' TALL)

    8 FOWLER HEEL WITH A PITCH (1 1/8'' TALL)

  • Width
    WIDTH
    • Men's boots are sized in B, D and EE widths.

    • B = narrow

      D = average to medium

      EE = wide

    • A general rule of thumb is the further you get from the letter A, the wider the boot is.

  • SIZE
    SIZE

    Lucchese boots generally run true to size, but don’t be surprised if your western boot’s size is slightly smaller than your dress shoe size due to its construction. The best way to find your fit is to confirm your foot size with a boot expert. You can also consult the charts below.

    Men's Size Conversions Chart

    size-chart

    TIP

    Lucchese boots typically fit about one half-size smaller than everyday dress shoes. If the boot has a padded foot bed, then the boot will fit to size. It’s a good idea to confirm your size with a shoe or boot expert every few years, as the size and shape of your feet can change over time.

    01 The ball of your foot shoud sit in the widest part of the boot.

    02  A properly fitting boot should feel like a firm handshake across the instep.

    03 There will be a slight slip in the heel.

    04 toes rest comforably in the ball.

    05 Tightest around the middle of the crown.

  • How To Try On A Cowboy Boot
    How To Try On A Cowboy Boot

    FOOT GOING IN

    FOOT IN

    01 Put both fingers through the pull straps and insert your foot into the boot.

    02 Keeping the heel on the ground, use your body weight to get your foot into the boot. *Note: You will feel resistance as you try to pull the boot on.

    03 As your foot sinks into the boot, listen for the audible “thump”.

    04 Walk around and feel the fit of the boot.

    05 What you’ll feel: Toes should be comfortable, and the snuggest section will be across the top of the foot. * Note: Notice the slight slip in the heel.

    COMMON FIT PROBLEMS

    If the boot feels too tight, go for a wider width. If the boot feels too loose, try a smaller size.

  • Wearing in Your Boots
    Wearing in Your Boots

    Once the boot fits, use these tips to help wear them in.

    CONDITION

    Coat your new boots with natural leather conditioner.

    WEAR

    For the first 6-8 outings, try for at least 2-3 hours of wear. Continued wear allows your body heat and moisture to permeate the boots, softening the leather. Over time, Lucchese’s leather heel, insole and outsole conform to the shape of your foot, providing a more flexible and comfortable fit.

    WAIT

    Be patient - the more you wear your new boots, the better.

    NOTE ABOUT EXOTICS:

    Soft leathers, such as goat or cowhide, have more elasticity than exotic leathers. Most exotics, such as alligator or ostrich, should be fitted with little to no additional stretching required.

This item is currently in stock at our retail store. To have it delivered to your home, call the store to place your order.

Notify Me When Available

FREE SHIPPING ON ORDERS OVER $100

30-DAY RETURN OR EXCHANGE

Dante is a Lucchese staple that calls ramblers, gamblers, merchants and all alike to the open range in style. Made from supple hand stained Full Quill ostrich leather, this Western silhouette will lay the foundation for your Lucchese collection. Handmade in Texas.

  • Full Quill ostrich vamps
  • Ranch Hand quarters
  • 13-inch quarters
  • Detailed stitch pattern
  • Pull strap with overlay
  • Mahogany stacked-leather heel
  • Single-stitched welt
  • Leather outsole
  • Handmade in Texas

Full Quill Ostrich

Our No. 1-selling exotic has a prized aesthetic suitable for board meetings and special occasions while also being tough enough for riding and rigorous outdoor activity. Ostrich is supple and molds nicely to the foot. Maximizing quill pattern is something we do more thoughtfully than any other bootmaker. When fit perfectly, full-quill ostrich makes the ultimate cowboy boot.

Hand Stained

A hand-stained boot has character that can’t be accomplished any other way. We start with a quality exotic leather and add layer after layer of custom pigment by hand. Each coat of polish is allowed to dry before the next coat is applied. It’s a proprietary process that gives our boots a dynamic patina. Yours may be lighter, brighter, or darker than the pair before or the pair after. The coveted effect is widely revered and often imitated — but no one does it like we do.

Instructions

Clean: Remove loose dust or dirt with damp cloth or soft brush. For heavily soiled products use Lucchese Leather Cleaner (see care instructions) Condition: Apply Lucchese Leather Conditioner to your boots liberally, let dry. Polish: Apply neutral or color matching cream-based polish and buff with a soft cloth to a shine. Protect: Apply Lucchese Premium Leather Protector.